HIKVISION DS-3WR12C - A.2 Default Parameters; Default Parameters

WiFi Router • User Guide
72
To access the page, log in to the web UI of the router and navigate to Route Settings > IPv6
Configuration > IPv6 Status.
You can change the IPv6 information of the router.
IPv6 Status
IPv6 status parameter description
Connection Type
It specifies the IPv6 connection type of the router.
IPv6 WAN Address
It specifies the WAN IPv6 address of the router.
After the IPv6 function is configured, the WAN port of the router
obtains a global unicast IPv6 address or a tunnel address, and a
link-local address.
Default IPv6 Gateway
It specifies the default IPv6 gateway address of the IPv6 network.
IPv6 LAN Address
It specifies the LAN IPv6 address of the router.
After the IPv6 function is configured, the LAN port of the router
obtains a global unicast IPv6 address or a tunnel address, and a
link-local address.
Primary IPv6 DNS
It specifies the primary and secondary DNS server addresses of the
IPv6 network.
Secondary IPv6 DNS
Parameter
Description