HIKVISION DS-6700HUHI-K Series User Manual

DS-6700HUHI-K Series Encoder User Manual
3
Applicable Models
This manual is applicable to the models listed in the following table.
Series
Model
DS-6700HUHI-K
DS-6704HUHI-K
DS-6708HUHI-K
DS-6716HUHI-K
Symbol Conventions
The symbols that may be found in this document are defined as follows.
Symbol
Description
Provides additional information to emphasize or supplement important points of the main
text.
Indicates a potentially hazardous situation, which if not avoided, could result in equipment
damage, data loss, performance degradation, or unexpected results.
Follow these precautions to prevent potential injury or material damage.
Warnings
● Proper configuration of all passwords and other security settings is the responsibility of the installer and/or
end-user.
● In the use of the product, you must be in strict compliance with the electrical safety regulations of the nation
and region. Please refer to technical specifications for detailed information.
● Input voltage should meet both the SELV (Safety Extra Low Voltage) and the Limited Power Source with 100
to 240 VAC, 48VDC or 12 VDC according to the IEC60950-1 standard. Please refer to technical specifications
for detailed information.
● Do not connect several devices to one power adapter as adapter overload may cause over-heating or a fire
hazard.
● Please make sure that the plug is firmly connected to the power socket.
● If smoke, odor or noise rise from the device, turn off the power at once and unplug the power cable, and then
please contact the service center.

HIKVISION DS-6700HUHI-K Series Specifications

General

Brand	HIKVISION
Model	DS-6700HUHI-K Series
Category	Media Converter
Language	English