HIKVISION DS-6700HUHI-K Series

DS-6700HUHI-K Series Encoder User Manual
61
The Sensitivity of the detection is supported by certain camera models. Refer to actual display for details.
10. Drag the slider to set the percentage.
Percentage: Range [1-100]. Percentage defines the ratio of the in-region part of the object which can trigger
the alarm. For example, if the percentage is set as 50%, when the object enters the region and occupies half
of the whole region, the alarm is triggered.
11. Repeat the above steps to configure other regions. Up to 4 regions can be set. You can click the Clear button
to clear all pre-defined regions.
12. Click Arming Schedule to set the arming schedule. Refer to Step 6 in Chapter 7.1.1 Configuring Motion
Detection.
13. Click Linkage Method to select the linkage methods for intrusion detection. Refer to Step 7 in Chapter 7.1.1
Configuring Motion Detection.
14. Click Save to save the settings.
7.2.3 Configuring Line Crossing Detection
Purpose:
Line crossing detection function detects people, vehicle or other objects which cross a pre-defined virtual line, and
some certain actions can be taken when the alarm is triggered.
Line crossing detection function varies according to different camera models.
Steps:
1. Go to Configuration > Event > Smart Event > Line Crossing Detection.