DS-6700HUHI-K Series Encoder User Manual
58
Figure 7. 12 Handling Exceptions
3. Click Save to save the settings.
7.2 Configuring Smart Event
You can configure the smart events by following the instructions in this section, including audio exception
detection, scene change detection, intrusion detection, and line crossing detection. These events can trigger the
linkage methods, such as Notify Surveillance Center, Send Email, Trigger Alarm Output, etc.
7.2.1 Configuring Audio Exception Detection
Purpose:
Audio exception detection function detects the abnormal sounds in the surveillance scene, such as the sudden
increase/decrease of the sound intensity, and some certain actions can be taken when the alarm is triggered.
Audio exception detection function varies according to different camera models.
Steps:
1. Go to Configuration > Event > Smart Event > Audio Exception Detection.
To Next Page
Loading...
