HIKVISION DS-6700HUHI-K Series - Maintenance; Rebooting the Device

DS-6700HUHI-K Series Encoder User Manual
85
5. You can click Export to save the searched log files to local directory.
12.2 Maintenance
Go to Configuration > System > Maintenance > Upgrade & Maintenance to enter the Maintenance page of the
encoder.
Figure 12. 2 Maintenance
12.2.1 Rebooting the Device
Steps:
1. Go to Configuration > System > Maintenance > Upgrade & Maintenance > Reboot.
Figure 12. 3 Reboot the Device
2. Click Reboot and the window pops up as below.
Figure 12. 4 Note
3. Click OK to reboot the device or Cancel to cancel the operation.