HIKVISION DS-6700HUHI-K Series

DS-6700HUHI-K Series Encoder User Manual
57
Figure 7. 11 Video Tempering Alarm Settings
3. Check Enable Video Tempering.
4. Set the tamper-proof area. Please refer to Step 5 in Chapter 7.1.1 Configuring Motion Detection.
5. Set the arming schedule for tamper-proof. Please refer to Step 6 in Chapter 7.1.1 Configuring Motion
Detection.
6. Set the actions taken for the tamper-proof alarm. Please refer to Step 7 in Chapter 7.1.1 Configuring Motion
Detection.
7. Click Save to save the settings.
7.1.6 Handling Exception
The exception type can be HDD full, HDD error, network disconnected, IP address conflicted, illegal login, and
record exception.
Steps:
1. Go to Configuration> Event > Basic Event > Exception.
2. Check the checkbox to set the actions taken for the exception alarm. Please refer to Step 7 in Chapter 7.1.1
Configuring Motion Detection.