DS-6700HUHI-K Series Encoder User Manual
78
Chapter 11 User Management
11.1 User Management
Go to Configuration > System > User Management > User Management to enter the User Management page.
Figure 11. 1 User Management
The admin user is allowed to create normal users. And up to 31 users can be created.
11.1.1 Adding a User
Steps:
1. Click Add to enter the Add User page.
2. Edit the User Name.
3. Select the Level to Operator or User.
4. Enter the Admin Password.
5. Enter the Password of the added user.
6. Confirm the same password.
STRONG PASSWORD RECOMMENDED– We highly recommend that you create a strong
password of your own choosing (using a minimum of 8 characters, including upper case letters, lower case
letters, numbers, and special characters) in order to increase the security of your product. We recommend
that you reset your password regularly, especially in the high security system, resetting the password
To Next Page
Loading...
