DS-6700HUHI-K Series Encoder User Manual
81
Figure 11. 5 Modify the Operator
3. Modify the editable parameters. You are highly recommended to use the strong password.
4. Configure the user permission for the user.
5. Click OK to save the settings.
You need the admin password to modify the admin user or operator.
11.1.3 Deleting a User
Steps:
1. Select a user account from the list on the User Management page to be deleted.
2. Click Delete, and the information box will pop up.
Figure 11. 6 Delete a User
To Next Page
Loading...
