HIKVISION DS-7100HWI-SL Series

User Manual of DS-7100HWI/HVI-SL/SH and DS-7200HI-SL Series DVR
146
13.1 Configuring General Settings
Purpose:
You can configure the BNC output standard, VGA output resolution, mouse pointer speed, etc.
Steps:
1. Enter the General Settings interface.
Menu > Configuration > General
2. Select the General tab.
Figure 13.1 General Settings Interface
3. Configure the following settings:
• Language: The default language used is English.
• CVBS Output Standard: Select the CVBS output standard to NTSC or PAL, which must be the
same with the video input standard.
• Resolution: Select the HDMI/VGA output resolution, which must be the same with the resolution
of the monitor screen.
• Time Zone: Select the time zone.
• Date Format: Set the date format.
• System Date: Select the system date.
• System Time: Set the system time.
• Mouse Pointer Speed: Set the speed of mouse pointer; 4 levels are configurable.
• Enable Wizard: Enable/disable the Wizard when the device starts up.
• Enable ID Authentication: Enable/disable the use of the login password.
4. Click the Apply button to save the settings.