HIKVISION DS-7100NI-K1/W/M Series - Page 24

Network Video Recorder User Manual
10
Figure 1-11 Custom Adding IP Camera Interface
2. You can edit the IP address, protocol, management port, and other information of the
IP camera to be added.
Note
If the IP camera to add has not been actiavated, you can activate it from the IP camera list
on the camera management interface.
3. Optional: Check the checkbox of Continue to Add to add other IP cameras.
4. Click Addto add the camera. The successfully added cameras are listed in the interface.
Table 1-1 Description of Icons
Icon
Description
Icon
Description
Edit basic parameters
of the camera.
Add the detected IP
camera.
The camera is
disconnected; you can
click the icon to get the
exception information
of camera.
Delete the IP camera.
Play the live video of
the connected camera.
Advanced settings of the
camera.
Upgrade the connected
IP camera.
Security
Show the security status of
the camera to be
active/inactive or the
password strength
(strong/medium/weak/risk