Network Video Recorder User Manual
13
Figure 1-14 Protocol Management Interface
Note
There are 16 customized protocols provided in the system, you can edit the protocol name;
and choose whether to enable the sub-stream.
2) Choose the protocol type of transmission and choose the transfer protocols.
Note
Before customizing the protocol for the network camera, you have to contact the
manufacturer of the network camera to consult the URL (uniform resource locator) for
getting main stream and sub-stream.
The format of the URL is: [Type]://[IP Address of the network camera]:[Port]/[Path]. Example:
rtsp://192.168.1.55:554/ch1/main/av_stream.
● Protocol Name: Edit the name for the custom protocol.
● Enable Substream: If the network camera does not support sub-stream or the sub-stream
is not needed leave the checkbox empty.
● Type: The network camera adopting custom protocol must support getting stream through
standard RTSP.
● Transfer Protocol: Select the transfer protocol for the custom protocol.
● Port: Set the port No. for the custom protocol.
To Next Page
Loading...
Need help?
General
