Network Video Recorder User Manual
18
Figure 2-3 Image Settings
2. Select a camera.
3. Adjust the slider or click on the up/down arrow to set the value of the brightness, contrast or
saturation.
4. Set Enable Rotate to Clockwise 270 degrees or OFF. When OFF is selected, the image is
restored to original.
5. Set Mirror Mode to Left-Right, Up-Down, Center or OFF. When OFF is selected, the image is
restored to original.
Note
● Rotate and Mirror functions must be supported by the connected IP camera.
● The image parameters adjustment can affect both the live view and the recording quality.
6. Click Apply.
To Next Page
Loading...
Need help?
General
