74
Please make sure the PTZ you are using can support sequence function.
Cruise setup
In “PTZ” menu, press “Setup” button on the right side of “Cruise” item, you can enter into
“Cruise” setup menu: Shown as fig 5.32
Fig 5.32 Cruise setup
Press “RecCru” button, you will enter into “PTZ control” interface. You can start controlling
PTZ with direction keys, press【ENTER】to save the operation track and return “Cruise” setup
menu. Press “StartCru” button to repeat the PTZ track until you press “Stop” button.
Press “Return” button back to “PTZ” menu. In “PTZ” menu, press “Confirm” button to save
this cruise.
Please make sure the PTZ you are using can support cruise function.
5.16 RS232 setup
There is one RS-232 port at DVR rear panel. In main menu, move “Active Frame” to
“RS232” icon and perss【ENTER】key, you enter into “RS232” setup menu:
To Next Page
Loading...
Need help?
General