3. Edit Box: This is for you to input characters. Press[EDIT]key to enter the
edit status, you can input text there:
a) Press[A]key to select number, upper case, lower case or symbols;
b) Use[→]and[←]keys to move cursor;
c) Use[EDIT]key to delete the character in front of cursor;
d) Press [ENTER] to save & [ESC] to exit without saving.
4. Button: Trigger a special function or enter the next sub-menu. For example,
press “Policy” button to enter the sub-menu. Press [Confirm] to save
parameters and return to main menu. Press [Cancel] button to cancel and
return to main menu. The button in grey means it can be operated only after
being enabled.
How to exit menu
Press [PREV] key to exit menu and return to preview mode.
To Next Page
Loading...
