To Next Page

To Previous Page

Step 7: Setup alarm policy: If there is view tampering alarm happened in

schedule, DVR will response based on the policy. You can select one or more solution

including “On Screen Warning”, “Audible Warning”, “Upload to Center” and

“Trigger Alarm Output”. You can use [↑] [↓] and [EDIT] key to enable or disable

them. “×” is disable and “” is enable.

Note: “Audible Warning” is not available here in DS-7204HI-S series Net

DVR.

Step 8: Save alarm setup: After your setup, press “Confirm” button and return

“Image Setup” interface. In “Image Setup” menu, press “Confirm” button to save

current camera parameters and return main menu.

Step 9: Save all cameras: If you want to setup other cameras, please repeat from

step2 to step 8. In “Image Setup” menu, press “Confirm” key to save all cameras

parameters. Press “Cancel” button or [ESC] key to abort.

Select “Off” option for “View Tampering”, you can delete the view tampering

area.

Note: Only one view tampering area can be setup for each camera. The view

tampering area can not be copied. If the schedule is modified, you must reboot

the device to make the parameters become effective.

HIKVISION DS-7204HI-S Series User Manual

Questions and Answers: