save 16 sequences.
Cruise setup: Cruise is remembering the track of PTZ movement. Please make
sure the PTZ you are using can support cruise function.
Preset setup
In “PTZ” menu, move “Active Frame” to “Setup” button on the right side of
“Preset” item, press[ENTER], you can enter “Preset” setup menu: Shown as Fig.5.32
below
Fig. 5.32 PTZ preset setup
Add preset number: You can input preset number (among 1~128) in the edit
box. Then press “Adjust” button to enter PTZ control interface. In PTZ control
interface, you can use direction keys to adjust PTZ position, and use [IRIS+] [IRIS-]
[FOCUS+] [FOCUS-] [ZOOM+] [ZOOM-] keys to adjust iris, focus and zoom. After
you finish adjusting, press [ENTER], then press “Save” button to save the preset
number. You can repeat this step to setup other preset numbers.
After you setup all preset numbers, press “Return” button to return “PTZ” menu.
In “PTZ” menu, press “Confirm” button to save all parameters.
Delete preset number: In “Preset” setup menu, input one preset number, press
“Delete” button, you can delete this preset number.
After deleting, press “Return” button to “PTZ” menu. In “PTZ” menu, press
“Confirm” button to save all modification.
Please make sure the PTZ you are using can support preset function.
Sequence setup
In “PTZ” menu, press “Setup” button on the right side of “Sequence No” item,
you can enter “Sequence” setup menu: Shown as Fig.5.33 below
To Next Page
Loading...
