Fig 5 ing setup
ord channel setup
You can select channels to record for each alarm input. In the sub menu, you can use
【EN ans enable.
ote: In order to trigger the channel to record, in “Recording” menu, you must enable
reco type as “Alarm” or other related type. Please refer to chapter 5.12.
Schedule for alarm handle method
When there is external alarm happened in the schedule, DVR will response according to the
hand
Description: If “On Screen Warning” is enabled, when there is external alarm happened and
DVR is in preview mode, DVR will pop-up the related camera. If you trigger more than one
camera, DVR will pop-up them one by one every 10 seconds. When the external alarm is
disappeared, DVR will restore preview mode.
Step 7: Save setup
In “Alarm in Handling” sub menu, press “Confirm” button and return “Alarms” menu. In
“Alarms” menu, press “Confirm” button to save the parameters.
.23 Alarm in handl
Step 4: Alarm trigger rec
TER】or【EDIT】key to enable record channel. “×” means disable and “9 me
N
rding and select record
Step 5:
le methods.
Step 6: Alarm handle method
You can select one or more handle method: “On Screen Warning”, “Audible Warning”,
“Upload to Center” and “Trigger Alarm Output”.
64
To Next Page
Loading...
