Digital Video Recorder User Manual
241
Figure 15-2 Copy Settings to Other Cameras
2) Select the camera (s) to be configured with the same OSD settings. You can also check the
checkbox of Analog to select all cameras.
3) Click the OK button to finish the Copy settings and back to the OSD Configuration
interface.
Step 8 Click the Apply button to apply the settings.
15.2 Configuring Privacy Mask
Purpose
You are allowed to configure the four-sided privacy mask zones that cannot be viewed or recorded
by the operator.
Step 1 Enter the Privacy Mask Settings interface.
Menu > Camera > Privacy Mask
Step 2 Select the camera to set privacy mask.
Step 3 Check the checkbox of Enable Privacy Mask to enable this feature.
To Next Page
Loading...
