Digital Video Recorder User Manual
244
Contrast and Saturation for the IP cameras. You can also click Restore to set the
parameters to the default settings.
Step 7 You can click Copy to copy the image settings of the current camera to other cameras.
Step 8 Click Apply to save the settings.
15.3.2 Configuring Camera Parameters Settings
This section is applicable to -F series DVR.
Step 1 Enter the Image Settings interface.
Menu > Camera > Image
Step 2 Select the Camera Parameters Settings tab.
Figure 15-7 Camera Parameters Settings
Step 3 Select the Camera from the dropdown list.
Step 4 Adjust the camera parameters. The parameters include Day to Night Sensitivity, Night to
Day Sensitivity and IR Light Brightness for the analog cameras. You can also click Default to
set the parameters to the default settings.
Step 5 You can click Copy to copy the parameters of the current camera to other analog cameras.
Step 6 Click Apply to save the settings.
To Next Page
Loading...
