HIKVISION DS-7316HQHI-F4/N User Manual

Digital Video Recorder User Manual
126
Step 4 Click Yes to reboot the device to activate the new settings or No to restore the old settings.
 For HGHI-F series DVR:
Task1: Enabling the 1080P Lite Mode
Step 1 Enter the Record menu
Menu > Record
Step 2 Click Advanced to enter the advanced interface.
Figure 5-48 Advanced Interface (for HGHI-F Series DVR)
Step 3 Check the checkbox of 1080P Lite Mode and click Apply to pop up the attention box.
Enabling 1080p lite will switch to real-time mode.
Figure 5-49 Enable 1080P Lite
Step 4 Click Yes to reboot the device to enable 1080p lite mode and the encoding mode will
change to real-time mode.
Task2: Disabling the 1080P Lite Mode
Step 1 Enter the General Configuration interface.
Menu > Configuration > General
Step 2 Click More Settings to enter the More Settings interface.
Figure 5-50 More Settings
Step 3 Select the Encoding Mode to Non-Real-Time Mode.
Step 4 Click Apply to pop up the attention box. Enabling non-real-time encoding will disable 1080p
lite mode.

HIKVISION DS-7316HQHI-F4/N Specifications

General

Product color	Black
Audio output channels	1.0 channels
Video compression formats	H.264
BNC input ports	1
Video input channels	16 channels
USB 2.0 ports quantity	2
Ethernet LAN	Yes
Ethernet interface type	Gigabit Ethernet
Supported network protocols	TCP/IP, PPPoE, DHCP, Hik Cloud P2P, DNS, DDNS, NTP, SADP, SMTP, SNMP, NFS, iSCSI, UPnP, HTTPS
HDD interface	Serial ATA
Maximum HDD capacity	6000 GB
Power consumption (typical)	45 W
Operating temperature (T-T)	-10 - 55 °C
Operating relative humidity (H-H)	10 - 90 %

Weight and Dimensions

Dimensions (WxDxH)	445 x 390 x 70 mm