HIKVISION DS-7316HQHI-F4/N User Manual

Digital Video Recorder User Manual
237
The S.M.A.R.T. (Self-Monitoring, Analysis and Reporting Technology) is a monitoring system for
HDD to detect and report on various indicators of reliability in the hopes of anticipating failures.
Step 1 Enter the HDD Detect interface.
Menu > Maintenance > HDD Detect
Step 2 Click the S.M.A.R.T. Settings tab to enter the interface.
Step 3 Select the HDD to view its S.M.A.R.T. information list, as shown in Figure 14-28.
If you want to use the HDD even when the S.M.A.R.T. checking is failed, you can check the
checkbox before the Continue to use this disk when self-evaluation is failed item.
Figure 14-28 S.M.A.R.T Settings Interface
14.9 Detecting Bad Sector
Purpose
You can detect the bad sector of the HDD to check the status of the HDD.
Step 1 Enter the HDD Detect interface.
Menu>HDD>HDD Detect
Step 2 Click the Bad Sector Detection tab to enter the interface.
Step 3 Select a HDD and click the Detect button to start detecting.

HIKVISION DS-7316HQHI-F4/N Specifications

General

Product color	Black
Audio output channels	1.0 channels
Video compression formats	H.264
BNC input ports	1
Video input channels	16 channels
USB 2.0 ports quantity	2
Ethernet LAN	Yes
Ethernet interface type	Gigabit Ethernet
Supported network protocols	TCP/IP, PPPoE, DHCP, Hik Cloud P2P, DNS, DDNS, NTP, SADP, SMTP, SNMP, NFS, iSCSI, UPnP, HTTPS
HDD interface	Serial ATA
Maximum HDD capacity	6000 GB
Power consumption (typical)	45 W
Operating temperature (T-T)	-10 - 55 °C
Operating relative humidity (H-H)	10 - 90 %

Weight and Dimensions

Dimensions (WxDxH)	445 x 390 x 70 mm