Digital Video Recorder User Manual
331
New functions for DS-7100/7200HGHI-F/N, DS-7100/7200HGHI-F, HQHI, and 7200HUHI-F/N series
DVR:
Connectable to HDCVI signal input. (Chapter 2.4.1 Configuring the Signal Input Wizard,
Chapter 2.7 Configuring the Signal Input Channel, Chapter 18.1 Specifications)
There is no signal input configuration interface. Four kinds of analog signal inputs including
Turbo HD, AHD, HDCVI and CVBS can be connected. The analog signal inputs can be recognized
automatically and can be mixed randomly. (Chapter 2.4.1 Configuring the Signal Input Wizard,
Chapter 2.7 Configuring the Signal Input Channel)
The main stream of HQHI series support up to 3 MP resolution for the first channel of DVR
with 4-ch video inputs, the first 2 channels of DVR with 8-ch video inputs and the first 4
channels of DVR with 16-ch video inputs. (Chapter 2.4.1 Configuring the Signal Input Wizard,
Chapter 2.7 Configuring the Signal Input Channel, Chapter 5.1 Configuring Encoding
Parameters)
For HQHI and DS-7200HUHI-F/N series DVR, if the 3 MP camera is connected to the channel
which supports up to 1080p signal input, it will switch to 1080p signal input. When the 3 MP
signal is switched to 1080p signal, the PAL will be switched to 1080p/25Hz, and the NTSC will
be switched to 1080p/30Hz. (Chapter 5.1 Configuring Encoding Parameters)
When Turbo HD, AHD, or HDCVI input is connected, the information including the resolutuion
and frame rate will be overlaid on the bottom right corner of the live view for 5 seconds.
When CVBS input is connected, the information such as NTSC or PAL will be overlaid on the
bottom right corner of the live view for 5 seconds. (Chapter 2.4.1 Configuring the Signal Input
Wizard, Chapter 2.7 Configuring the Signal Input Channel)
When Turbo HD, AHD, or HDCVI input is connected, you can view the information including
the input signal type, resolution and frame rate (e.g., Turbo HD 720P25) on the Record
Parameters interface. When CVBS input is connected, you can view the information such as
NTSC or PAL on the Record Parameters interface. (Chapter 5.1 Configuring Encoding
Parameters)
If DHCP is enabled, you can enable DNS DHCP or disable it and edit the Preferred DNS Server
and Alternate DNS Server. (Chapter 2.4.1 Configuring the Signal Input Wizard, Chapter 12.1
Configuring General Settings)
18.4.4 Version 3.4.70
Added:
New functions for DS-7100/7200HGHI-F and DS-7100/7200HQHI-F/N series DVR:
There is no signal input configuration interface. Four kinds of analog signal inputs including
Turbo HD, AHD, HDCVI and CVBS can be connected. The analog signal inputs can be recognized
automatically and each two of the analog signal inputs can be mixed randomly. (Chapter 2.4.1
Configuring the Signal Input Wizard, Chapter 2.7 Configuring the Signal Input Channel)
To Next Page
Loading...
Need help?
General
Weight and Dimensions
