Digital Video Recorder User Manual
62
Figure 2-20 General Network Configuration
DS-8100HQHI-F/N and DS-7300/8100/9000HUHI-F/N series have 2 self-adaptive
10M/100M/1000M network interfaces. For DS-8100HQHI-F/N series, three working modes
are configurable: multi-address, load balance and network fault tolerance. For
DS-7300/8100/9000HUHI-F/N series, only multi-address and network fault tolerance are
configurable. Other models have 1 self-adaptive 10M/100M/1000M network interface or 1
self-adaptive 10M/100Mbps network interface.
For all the -F series DVR, if DHCP is enabled, you can check the checkbox of Enable DNS
DHCP or uncheck it and edit the Preferred DNS Server and Alternate DNS Server.
Step 5 Click Next button after you configured the basic network parameters. Then you will enter
the Hik Cloud P2P interface. Configure the Hik Cloud P2P according to your need.
To Next Page
Loading...
