Chapter 3 Menu Operation
3.1 Startup, Shutdown and Reboot
Proper startup and shutdown procedures are crucial to expand the life of your device.
Startup Your Device
Ensure the voltage of the extra power supply satisfies the requirement, and the ground
connection is working properly.
Plug the power supply into an electrical outlet. It is HIGHLY recommended that an Uninterruptible
Power Supply (UPS) is used in conjunction with the device.
Press the power button on the panel. The power indicator LED would be lighted up which
indicating the device begins to start up.
Shut Down Your Device
Go to Menu → Shutdown. Click Shutdown, and click Yes.
If your device has a power button on the front panel, you can also hold the power button for 3
seconds, and then enter the admin user name and password to shut down your device.
Note
Do not press the POWER button again when the system is shutting down.
Reboot Your Device
Go to Menu → Shutdown. Click Reboot, and your device will restart.
Figure 3-1 Startup, Shutdown and Reboot
3.2 Activate Your Device
For the first-time access, you need to activate the device by setting an admin password. No
operation is allowed before activation. You can also activate the device via Web Browser, SADP or
To Next Page
Loading...
Need help?
General
