Activation Password as its password. (Refer to Activate Your Device.)
Note
● It is recommended to keep the distance between Wi-Fi camera and device within 50 meters.
● Only certain Wi-Fi camera models and versions support this function.
● Ensure the Wi-Fi camera is powered on, not activated, and has not been connected with other
devices via network cable.
3.6.2 Add IP Cameras
Ensure the network connection is valid and correct, and the IP camera has been activated.
Before You Start
Ensure the network connection is valid and correct, and the IP camera has been activated.
Enter the context of your task here (optional).
Steps
1. Click to select an idle window in the live view mode.
2. Click in the center of the window.
Figure 3-7 Add IP Camera
3. Select the detected IP camera directly, or enter IP camera parameters.
4. Click Add.
3.7 Live View
Live view shows you the video image getting from each camera in real time. The device will
automatically enter Live View mode when powered on. You can click at the toolbar to start
recording.
In the live view mode, there are icons at the right top of the screen to indicate the status of record
and alarm for each channel.
To Next Page
Loading...
Need help?
General
