HIKVISION DS-7608NI-SE/8P - Motion and Event Recording Setup

www.hikvision.com/en/us
To set the NVR to MOTION RECORDING, go to:
1. “MENU”>”RECORDING CONFIGURATION”
2. Click on the “EVENT” under the calendar (yellow). After this the mouse cursor will change to a
WAND.
3. Select the calendar, and it will turn YELLOW (just like on a computer, click on the top-left
corner of the calendar and drag to the bottom-right corner).
4. Press APPLY.
5. Press COPY to copy the new schedule to the remaining cameras.
SETTING UP RECORDING