HIKVISION DS-7608NI-SE/8P User Manual

www.hikvision.com/en/us
After the recording has been set to “EVENT RECORDING” go to “MOTION DETECT” to set the
motion detection for every camera. In this step, the IP cameras need to be configured individually.
SETTING UP RECORDING
Motion Area
The grid indicates
the area, where
motion will be
detected
Motion Sensitivity
The amount of bright
green squares
indicates the
sensitivity level. (in
this picture the
sensitivity is set to 3)
Motion Detection
Setup

HIKVISION DS-7608NI-SE/8P Specifications

General

Brand	HIKVISION
Model	DS-7608NI-SE/8P
Category	Network Hardware
Language	English