Quick Operation Guide of Digital Video Recorder
3
Steps (For DS-9100/9000HWI-ST):
1. Fasten the hard disk mounting handle to the hard disk with screws.
2. Insert the key and turn in clockwise direction to open the panel lock.
3. Press the buttons on the panel of two sides and open the front panel.
4. Insert the hard disk along the slot until it is placed into position.
5. Repeat the above steps to install other hard disks onto the DVR. After having finished
the installation of all hard disks, close the front panel and lock it with the key again.
To Next Page
Loading...
