Network Video Recorder User Manual
122
Configure Sensor Alarms
Purpose:
Set the handling action of an external sensor alarm.
Configure Alarm Inputs
Go to System> Event>Normal Event>Alarm Input
Select an alarm input item from the list and click .
Alarm Input
Select the alarm input type to N.C or N.O.
Edit the alarm name.
Check Input.
Set the arming schedule. Refer to Chapter 11.1 Configure Arming Schedule.
Set the linkage actions. Refer to Chapter 11.2 Configure Alarm Linkage Actions.
Configure One-Key Disarming
One-Key Disarming disarm Alarm Input 1 by one-key operation.
To Next Page
Loading...
