Network Video Recorder User Manual
67
Click on the quick settings toolbar of the PTZ camera’s Live View. The PTZ control panel
displays on the right of the interface.
Click PTZ Parameters Settings to set the PTZ parameters.
PTZ Parameters Settings
Edit the PTZ camera parameters.
All the parameters should be exactly match the PTZ camera parameters.
Click OK to save the settings.
Set PTZ Presets, Patrols, and Patterns
Before You Start
Make sure that the presets, patrols, and patterns are supported by PTZ protocols.
Set Presets
Purpose
Follow these steps to set the preset location that you want the PTZ camera to point to when an
event takes place.
Click on the quick settings toolbar of the PTZ camera’s live view.
To Next Page
Loading...
Need help?
General
