Network Video Recorder User Manual
191
If you need to enable the HTTP service, you can set the HTTP authentication to enhance the access
security.
Go to System > System Service > System Service.
HTTP Authentication
Check Enable HTTP to enable the HTTP service.
Select HTTP Authentication.
Two authentication types are selectable, for security reasons, it is recommended to select digest as
the authentication type.
Click Apply to save the settings.
Restart the device to take effect the settings.
Two authentication types are selectable, for security reasons, it is recommended to select digest as
the authentication type.
Disable HTTP
Purpose
The admin user account can disable the HTTP service from the GUI or the web browser.
After the HTTP is disabled, all the related services, including the ISAPI, Onvif and Gennetc, will
terminate as well.
Go to System > System Service > System Service.
Uncheck Enable HTTP to disable the HTTP service.
Click Apply to save the settings.
Restart the device to take effect the settings.
RTSP Authentication
Purpose
You can specifically secure the stream data of live view by setting the RTSP authentication.
To Next Page
Loading...
Need help?
General
