Network Video Recorder User Manual
22
Turns on/off PTZ light (if applicable) in PTZ
control mode.
Switches between play and reverse play in
playback mode.
Cycles through tab pages.
Switches between channels in synchronous
playback mode.
Returns to the Main menu (after successful
login).
Presses and holds the button for five seconds to
turn off audible key beep.
Starts wiper (if applicable) in PTZ control mode.
Shows/hides the control interface in playback
mode.
Switches between single screen and multi-
screen mode.
Adjusts the focus in conjunction with the
A/FOCUS+ button in PTZ control mode.
Enters the PTZ Control mode.
Adjusts the iris of the PTZ camera in PTZ control
mode.
Navigates between different fields and items in
menus.
In the playback mode, use the Up and Down
buttons to speed up and slow down recorded
video. Use the Left and Right buttons to select
the next and previous video files.
Cycles through channels in live view mode.
Controls the movement of the PTZ camera in PTZ
control mode.
Confirms selection in any of the menu modes.
Checks the checkbox fields.
To Next Page
Loading...
