Network Video Recorder User Manual
65
Enable the channel-zero encoding when you need to get a remote view of many channels in real
time from a web browser or CMS (Client Management System) software, in order to decrease the
bandwidth requirement without affecting the image quality.
Go to System>Live View>General.
Set the video output interface to Channel-Zero.
Go to System>Live View>Channel-Zero.
Check Enable Channel-Zero Encoding.
Live View, Channel-Zero Encoding
Configure the Frame Rate, Max. Bitrate Mode, and Max. Bitrate. The higher frame rate and
bitrate settings result in higher bandwidth requirement.
Click Apply.
Result:
You can view all of the channels on one screen using the CMS or a web browser.
To Next Page
Loading...
Need help?
General
