Network Video Recorder User Manual
76
Select the NAS disk from the list shown below, or manually enter the directory in the NetHDD
Directory text field.
Click the OK to complete the adding of the NAS disk.
Result:
After successfully adding the NAS disk, return to the HDD Information menu. The added NetHDD
will be displayed in the list.
Adding an IP SAN
Go to Storage > Storage Device.
Click Add to enter the Custom Add interface.
Select NetHDD from the drop-down list.
Select the type to IP SAN.
Enter the NetHDD IP address in the text field.
Click Search to search the available IP SAN disks.
Select the IP SAN disk from the list.
Click OK to complete adding IP SAN disk.
A single IP SAN disk can be added.
To Next Page
Loading...
Need help?
General
