Network Video Recorder User Manual
148
Figure 15-5 Set Double Verification User
2. Check Enable Double Verification.
3. Set double verification user. The double verification is different from the system user. You can
add up to 8 double verification users.
1) Click Add to add a double verification user.
2) Enter the admin password.
3) Set the user parameters, including user name, password, camera permission, etc.
4) Click OK.
4. Click Apply.
5. Set permission for non-admin users.
1) Go to System → User.
2) Click to edit user permission.
3) Select Camera Permission. Only Local Playback, Remote Playback/Download, and Local
Video Export are available for double verification.
4) Select the channel(s) that requires double verification.
5) Click OK.
15.3 Configure Password Security
15.3.1 Export GUID File
The GUID file can help you to reset password when you forget it. You can export GUID file via web
browser. Please keep the GUID file properly.
Before You Start
Ensure you are on the same network segment with your device.
Steps
1. Go to Configuration → System → User Management → User Management.
2. Select the admin user.
3. Click Account Security Settings.
4. Click Modify.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
