EasyManuals Logo

HIKVISION DS-9664NI-M8 User Manual

HIKVISION DS-9664NI-M8
202 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #92 background imageLoading...
Page #92 background image
Network Video Recorder User Manual
71
6.2.9 Vehicle Detection
Vehicle detection, available in the road traffic monitoring, is tend to detect the passed vehicle on
the road, and capture its license plate at the same time.
Steps
1. Go to Smart Analysis Smart Event Settings Vehicle Detection.
2. Select a camera.
3. Click Vehicle.
4. Check Enable Vehicle Detection.
5. Optional: Check Save VCA Picture to save the captured vehicle detection pictures.
6. Configure rules, including Area Settings, Picture, Overlay Content, and Blocklist and Allowlist.
Area Settings
Up to 4 lanes are selectable.
Blocklist and Allowlist
You can export the file first to see its format, and edit it and import it to the device.
7. Click Apply.
Note
Refer to Network Camera User Manual for detailed instructions for the vehicle detection.
8. Set the arming schedule. Refer to Configure Arming Schedule.
9. Set the linkage actions. Refer to Configure Linkage Actions.
6.2.10 Multi-Target-Type Detection
Multi-target-type detection enables the device to detect the faces, human bodies and vehicles
simultaneously in a scene.
Steps
1. Go to Smart Analysis Smart Event Settings Video Structuralization.
2. Select a camera.
3. Check Enable Multi-Target-Type Detection.
4. Optional: Check Save VCA Picture to save the captured intrusion detection pictures.
5. Set detection area.
1) Click Draw Area.
2) Adjust the red frame on the image to draw the detection area. It is full screen by default.
3) Click Stop Drawing.
6. Set the arming schedule. Refer to Configure Arming Schedule.
7. Set linkage actions. Refer to Configure Linkage Actions.
8. Click Apply.

Table of Contents

Other manuals for HIKVISION DS-9664NI-M8

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the HIKVISION DS-9664NI-M8 and is the answer not in the manual?

HIKVISION DS-9664NI-M8 Specifications

General IconGeneral
Video codecsH.265+/H.265/H.264+/H.264
Input bandwidth400 Mbit/s
Maximum resolution7680 x 4320 pixels
Alarm input channels16
Video input channels64 channels
Alarm output channels9
Supported resolutions8K (7680 × 4320)/30Hz, 4K (3840 × 2160)/60Hz, 4K (3840 × 2160)/30Hz, 2K (2560 × 1440)/60Hz, 1920 × 1080/60Hz, 1600 × 1200/60Hz, 1280 × 1024/60Hz, 1280 × 720/60Hz, 1024 × 768/60Hz 4K (3840 × 2160)/60Hz, 4K (3840 × 2160)/30Hz, 2K (2560 × 1440)/60Hz, 1920 × 1080/60Hz, 1600 × 1200/60Hz, 1280 × 1024/60Hz, 1280 × 720/60Hz, 1024 × 768/60Hz 1920 × 1080/60Hz, 1280 × 1024/60Hz, 1280 × 720/60Hz, 1024 × 768/60Hz 1920 × 1080/60Hz, 1280 × 1024/60Hz, 1280 × 720/60Hz, 1024 × 768/60Hz
Number of simultaneously playbacked channels16 channels
CertificationCE, FCC Part 15 Subpart B, ANSI C63.4-2014 EN 55032:2015, EN 61000-3-2, EN 61000-3-3, EN 50130-4
Product colorBlack
Rack capacity2U
Rack mountingYes
Brand compatibilityHikvision Digital Technology
AC input voltage100 - 240 V
AC input frequency50 - 60 Hz
Power consumption (typical)50 W
Operating temperature (T-T)-10 - 55 °C
Operating relative humidity (H-H)10 - 90 %
Wi-Fi-
RAID levels0, 1, 5, 6, 10
HDD capacity- GB
HDD interfaceSATA, eSATA
Maximum storage capacity14 TB
eSATA ports quantity1
USB 2.0 ports quantityUSB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Ethernet LAN data rates10, 100, 1000 Mbit/s
Ethernet LAN (RJ-45) ports2
Supported network protocolsTCP/IP, DHCP, IPv4, IPv6, DNS, DDNS, NTP, RTSP, SADP, SMTP, SNMP, NFS, iSCSI, ISUP, UPnP™, HTTP, HTTPS
Internal SATA ports quantity8
Weight and Dimensions IconWeight and Dimensions
Depth465 mm
Width445 mm
Height93 mm
Weight10000 g

Related product manuals