EasyManuals Logo

HIKVISION DS-9664NI-M8 User Manual

HIKVISION DS-9664NI-M8
202 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #152 background imageLoading...
Page #152 background image
Network Video Recorder User Manual
131
3. Optional: Enable the alternate SMTP, and configure the required parameters for alternate
SMTP. When the preferred SMTP is invalid, the device will use alternate SMTP to send emails.
4. Optional: Click Test to send a test email.
5. Click Apply.
13.5 Configure Port Mapping (NAT)
Two ways are provided for port mapping to realize the remote access via the cross-segment
network, UPnP and manual mapping.
Before You Start
If you want to enable the UPnP function of the device, you must enable the UPnP function of
the router to which your device is connected. When the network working mode of the device is
set as multi-address, the Default Route of the device should be in the same network segment as
that of the LAN IP address of the router.
Universal Plug and Play (UPnP) can permit the device seamlessly discover the presence of other
network devices on the network and establish functional network services for data sharing,
communications, etc. You can use the UPnP function to enable the fast connection of the device
to the WAN via a router without port mapping.
Steps
1. Go to System Network TCP/IP NAT.
Figure 13-3 Port Mapping Setting
2. Check Enable.
3. Select Mapping Type as Manual or Auto.
Auto: If you select Auto, the port mapping items are read-only, and the external ports are set
by the router automatically.
Manual: If you select Manual, you can edit the external port on your demand by clicking to
activate External Port Settings.

Table of Contents

Other manuals for HIKVISION DS-9664NI-M8

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the HIKVISION DS-9664NI-M8 and is the answer not in the manual?

HIKVISION DS-9664NI-M8 Specifications

General IconGeneral
Video codecsH.265+/H.265/H.264+/H.264
Input bandwidth400 Mbit/s
Maximum resolution7680 x 4320 pixels
Alarm input channels16
Video input channels64 channels
Alarm output channels9
Supported resolutions8K (7680 × 4320)/30Hz, 4K (3840 × 2160)/60Hz, 4K (3840 × 2160)/30Hz, 2K (2560 × 1440)/60Hz, 1920 × 1080/60Hz, 1600 × 1200/60Hz, 1280 × 1024/60Hz, 1280 × 720/60Hz, 1024 × 768/60Hz 4K (3840 × 2160)/60Hz, 4K (3840 × 2160)/30Hz, 2K (2560 × 1440)/60Hz, 1920 × 1080/60Hz, 1600 × 1200/60Hz, 1280 × 1024/60Hz, 1280 × 720/60Hz, 1024 × 768/60Hz 1920 × 1080/60Hz, 1280 × 1024/60Hz, 1280 × 720/60Hz, 1024 × 768/60Hz 1920 × 1080/60Hz, 1280 × 1024/60Hz, 1280 × 720/60Hz, 1024 × 768/60Hz
Number of simultaneously playbacked channels16 channels
CertificationCE, FCC Part 15 Subpart B, ANSI C63.4-2014 EN 55032:2015, EN 61000-3-2, EN 61000-3-3, EN 50130-4
Product colorBlack
Rack capacity2U
Rack mountingYes
Brand compatibilityHikvision Digital Technology
AC input voltage100 - 240 V
AC input frequency50 - 60 Hz
Power consumption (typical)50 W
Operating temperature (T-T)-10 - 55 °C
Operating relative humidity (H-H)10 - 90 %
Wi-Fi-
RAID levels0, 1, 5, 6, 10
HDD capacity- GB
HDD interfaceSATA, eSATA
Maximum storage capacity14 TB
eSATA ports quantity1
USB 2.0 ports quantityUSB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Ethernet LAN data rates10, 100, 1000 Mbit/s
Ethernet LAN (RJ-45) ports2
Supported network protocolsTCP/IP, DHCP, IPv4, IPv6, DNS, DDNS, NTP, RTSP, SADP, SMTP, SNMP, NFS, iSCSI, ISUP, UPnP™, HTTP, HTTPS
Internal SATA ports quantity8
Weight and Dimensions IconWeight and Dimensions
Depth465 mm
Width445 mm
Height93 mm
Weight10000 g

Related product manuals