HIKVISION DS-A80 Series Quick Operation Guide

Quick Operation Guide of DS-A81 Series Storage System
42
Figure 6. 17 Add Local Hot Spare Disk
2. Select the array to which the hot spare is added.
3. Select the available disk to be used as hot spare disk.
4. Click the OK button and confirm the following pop-up dialog box to add the local hot spare.
Figure 6. 18 Pop-up Dialog Box
5. Click the Close button to finish the adding of hot spare disk .You can view the information of
the added hot spare on the Hot Spare Disk List.
Figure 6. 19 Hot Spare Disk List
When the specified array status changes to Degraded, the system will automatically start to
rebuild the array.
Manual-rebuilding
Purpose:
When there is a free disk in the system while no hot spare disk is available, you can start the array
rebuilding manually.
Steps:
1. Enter the Array Management interface.
Storage > Array
Figure 6. 20 Array List
2. If the array state is displayed as Degraded, click Maintain on the Array List to enter the array
maintenance interface.

HIKVISION DS-A80 Series Specifications

General

Brand	HIKVISION
Model	DS-A80 Series
Category	Storage
Language	English