HIKVISION DS-E04NI-Q1 User Manual

3.3 Event Playback
When you select the event playback mode, the system will analyze and mark videos that contain
the moon detecon, line crossing detecon, or intrusion detecon informaon, .
Before You Start
●
Ensure the camera has enabled Dual-VCA. You can enable it via the camera web browser
interface in Conguraon → Video/Audio → Display Info. on Stream .
●
Ensure your video recorder has enabled Save VCA Data. You can enable it in
Conguraon →
Record → Advanced .
Steps
1. Go to Playback .
2. Click Event.
3. Select a camera.
Figure 3-4 Event Playback
4. Posion the cursor on playback window to show control bar.
Table 3-3
Buon Descripon
Buon Descripon Buon Descripon
Add tag. Zoom in/out playback
image.
Clip video. Lock/unlock video.
Congure detecon
area.
Turn on/o audio.
5. Click to set detecon areas of line crossing detecon, intrusion detecon, or moon
detecon.
6. Click to search videos. Videos meet the detecon rule requirement will be marked in red.
7. Click
to congure the play strategy.
Do not Play Normal Videos
Network Video Recorder User Manual
11

HIKVISION DS-E04NI-Q1 Specifications

General

Brand	HIKVISION
Model	DS-E04NI-Q1
Category	Network Hardware
Language	English