Note
If the device is already bound with an account, you should unbind with the current account.
7. Click Apply.
What to do next
You can access your video recorder via Hik-Connect.
5.2.3 Email
Set an email account to receive event
nocaon.
Before You Start
●
Ensure SMTP service is available for your email.
●
Congure your network parameters. Refer to General for details.
Steps
1. Go to
Conguraon → Network → Email .
Figure 5-6 Email
2. Set email parameters
Server
Authencaon
Check it to enable the server authencaon feature.
User Name
The user account of email sender for SMTP server authencaon.
Network Video Recorder User Manual
19