HIKVISION DS-E04NI-Q1 User Manual

4. Click Add.
Edit Connected Network Camera
You can edit the IP address, protocol and other parameters of the added network cameras.
Steps
1. Go to
Conguraon → Camera → Camera → IP Channel .
2. Click of an added network camera.
Channel Port
If the connected device is an encoding device with
mulple channels, you can choose the
channel to connect by selecng the channel port No. in the drop-down list.
3. Click OK.
Upgrade Network Camera
The Network camera can be remotely upgraded through the device.
Before You Start
●
Ensure you have inserted the USB ash drive to the device, and it contains the network camera
upgrade rmware.
●
Ensure your network camera is on the same network segment with your video recorder.
●
Ensure the network connecon is valid and correct.
Steps
1. Go to Conguraon → Camera → Camera → IP Channel .
2. Click
.
3. Click Yes to conrm.
4. Select the camera upgrade rmware from your storage device.
5. Click Upgrade to start upgrading. The camera will restarted automacally aer upgrade
completed.
Congure
Advanced Camera Parameters
You can congure advanced camera parameters like camera IP address, camera password, etc.
Before You Start
●
Ensure your network camera is on the same network segment with your video recorder.
●
Ensure the network
connecon is valid and correct.
Steps
1. Go to Conguraon → Camera → Camera → IP Channel → IP Camera .
2. Click .
3. Set camera parameters like IP address, camera password, etc.
Network Video Recorder User Manual
49

HIKVISION DS-E04NI-Q1 Specifications

General

Brand	HIKVISION
Model	DS-E04NI-Q1
Category	Network Hardware
Language	English