HIKVISION DS-K1T105E-C User Manual

Access Control Terminal·Quick Start Guide
20
 Set the working mode of the terminal as card reader, which can be
configured in System Parameter –> Mode Switch, if the terminal requires
working as a card reader.
 When the access control terminal works as a RS485 card reader, the
default RS485 address is 1. RS485 address can also be configured in
System Parameter -> Serial Port Settings.

HIKVISION DS-K1T105E-C Specifications

General

Brand	HIKVISION
Model	DS-K1T105E-C
Category	IP Access Controllers
Language	English