Access Control Terminal·Quick Start Guide
28
Figure 6-3 Password Authentication Interface
3. Enter the default configuration password.
Click the # key to confirm the settings. If the configuration password
authentication failed, the system will return to the initial interface, and if the
configuration password is successfully authenticated, the system will enter the
menu operation interface
Figure 6-4 Menu Operation Interface
On the menu operation interface, you can manage users, set communication
parameters, set system parameters, and so on.
6.1 User Management
Purpose:
On the user management interface, you can add and manage users.
Steps:
1. Move the cursor to User (user management) with the direction keys.
2. Click the # key to enter the user management interface.