Face Recognition Terminal Quick Start Guide
21
7. Click OK button to start activation.
8. Click the Modify Netinfor button to pop up the Network Parameter Modification interface.
9. Change the device IP address to the same network segment as your computer by modifying
the IP address manually.
10. Input the password and click OK to save the settings.
After activation, you will enter the initial page.
5.2 Login
You should enter the system backend first before setting the device parameters.
Steps:
1. Long tap the initial page for 3s to open the password inputting window.
2. Tap the Password field and input the device activation password.
Note: The password here is the activation password.
3. Tap OK to enter the home page.
To Next Page
Loading...
