Face Recognition Terminal Quick Start Guide
7
Chapter 1 Overview
1.1 Introduction
DS-K1T604 series face recognition terminal is a kind of access control device for face
recognition, which is mainly applied in security access control systems, such as logistic
centers, airports, university campuses, alarm centrals, dwellings and so on.
1.2 Main Features
7-inch LCD touch screen with the screen ratio of 16:9 and the resolutions of 1024 × 600 pixel
to display operation interface, detect live face, view live video, etc.
2,000,000-pixel wide-angle dual-lens
Adjusts supplement light brightness manually or automatically
QR code authentication
Face recognition distance: between 0.3 m and 1 m
Suggested height for face recognition: between 1.4 m and 1.9 m
Live face detection: Only live face can be detected and authenticated
Deep learning algorithm
Max. 10,000 face storage
Multiple authentication modes:
Card, card and password, card or password, fingerprint, fingerprint and password, fingerprint
or card, fingerprint and card, fingerprint and card and password, card or fingerprint or face or
password, face and fingerprint, face and password, card and face, face, employee ID and
password, fingerprint or password, employee ID and fingerprint, employee ID and fingerprint
and password, card and fingerprint and face, face and fingerprint and password, employee ID
and face, face and fingerprint and password, employee ID and face, face or fingerprint, card or
face or password
Note: Only products with fingerprint module support the fingerprint scanning function.
Face recognition duration ≤ 0.5s/User; face recognition accuracy rate ≥ 99%
Device parameters management, search, and settings
Imports card and user data to the device via TCP/IP communication or USB flash drive
Stand-alone operation
Transmits data (authentication results and captured pictures) to the client software via TCP/IP
communication and saves the data on the client software
Capture linkage and captured pictures saving
To Next Page
Loading...
Need help?
General
