To Next Page

To Previous Page

Chapter 3 Installaon

3.1 Installaon Environment

●

Avoid backlight, direct sunlight, and indirect sunlight.

●

For

beer recognion, there should be light source in or near the installaon environment.

●

The minimum bearing weight of the wall or other places should be 3

mes heavier than the

device weight.

●

There shall be no strong

reecve objects (such as glass doors/walls, stainless steel objects,

acrylic and other glossy

plascs, lacquer, ceramic les, etc.) within 1 m of the eld of view of the

device.

●

Avoid device reecon.

●

Face recognion distance shall be greater than 30 cm.

●

Keep the camera clean.

Note

For details about installaon environment, see Tips for Installaon Environment.

3.2 Install with Gang Box

Steps

Make sure the gang box is installed on the wall.

Note

You should purchase the gang box separately.

DS-K1T6QT-F43 Series Face Recognion Terminal User Manual

HIKVISION DS-K1T6QT-F43EW User Manual

Questions and Answers: