HIKVISION DS-K1T6QT-F43EW

The device will read card via Wiegand 34 protocol (read 4 bytes).
8.4.6 Face Parameters Sengs
Set face parameters.
Face Parameters Sengs
Tap Conguraon → Smart → Intelligent Parameter .
Figure 8-9 Face Parameters
Note
The funcons vary according to dierent models. Refers to the actual device for details.
Set Face Parameters.
Face An-spoong
Enable or disable the live face detecon funcon. If enabling the funcon, the device can
recognize whether the person is a live one or not.
Live Face Detecon Security Level
Aer enabling the face an-spoong funcon, you can set the matching security level when
performing live face
authencaon.
DS-K1T6QT-F43 Series Face Recognion Terminal User Manual
85