To Next Page

To Previous Page

Call Room

When you tap the call buon on the authencaon page, you should dial a room No. to

call.

Call Center

When you tap the call buon on the authencaon page, you can call the center directly.

Call Specied Room No.

You should set a room No. When you tap the call buon on the authencaon page, you

can call the congured room directly without dialing.

Theme

You can set the theme of the prompt window on the authencaon page. You can select Theme

as Default/Simple. If select Simple, the live view of the authencaon page will be disabled,

and in the meanwhile, the person's name, employee ID, face pictures will all be hidden.

Voice

Sengs

You can enable/disable the voice prompt funcon and adjust the voice volume.

Note

You can set the voice volume between 0 and 10.

Time Sengs

Set the me zone, the device me and the DST.

Sleeping (s)

Set the device sleeping waing me (minute). When you are on the inial page and if you set

the sleeping

me to 30 min, the device will sleep aer 30 min without any operaon.

Note

If you set the sleeping me to 0, the device will not enter sleeping mode.

Wait to Logout (s)

If there is no operaon within the congured me, the system will logout.

Select Language

Select the language according to actual needs.

Community No.

Set the device installed community No.

Building No.

Set the device installed building No.

Unit No.

Set the device installed unit No.

DS-K1T6QT-F43 Series Face Recognion Terminal User Manual

HIKVISION DS-K1T6QT-F43EW User Manual

Questions and Answers: