DS-KH9510-WTE1 Video Intercom Indoor Station Configuration Guide
CG DS-KH9510-WTE1 Video Intercom 031621NA 12
1.5 Sound Settings
You can set the ringtone, ring duration, call forwarding time, volume of microphone and loudspeaker and
enable/disable touch sound on call settings page.
Steps
1. Tap Settings → to enter the call settings page.
Figure 10, Call Settings
2. Set corresponding parameters.
• Ringtone: There are three ringtones by default, and you can custom and import at most four
ringtones via Batch Configuration Tool or iVMS-4200 Client Software.
• Ringtone Duration: The maximum duration of indoor station when it is called without being
accepted. Ringtone duration ranges from 30 s to 60 s.
• Call Forwarding: The ring duration limit beyond which the call is automatically forwarded to the
mobile phone designated by the resident. Call forwarding ranges from 0 s to 20 s.
• Volume Settings: Adjust the prompt sound volume, call volume and touch sound.
NOTE: Indoor Extension does not support the ring duration settings, or call forwarding settings.
1.6 Restore Indoor Station
Steps
1. Tap Settings → → Configuration → to enter the restore default settings page.
To Next Page
Loading...
