HIKVISION DS-KV8213 - Page 47

Figure 5-11 Backlight
1) Check the checkbox to enable BLC.
2) Select BLC Area.
6.
Click Save to enable the
sengs.
OSD Sengs
You can customize the camera name, me/date format, display mode, and OSD size
displayed on the live view.
Steps
1.
Click Image → OSD Sengs to enter the sengs page.
2.
Check the corresponding checkbox to select the display of camera name, date or
week if required.
3.
Edit the Camera Name.
4.
Select from the drop-down list to set the Time Format and Date Format.
5.
Adjust the OSD
posion.
6.
Click Save to enable the sengs.
Target Cropping
Video Intercom Villa Door Staon User Manual
36